Description
Quality Aftermarket Electronic Ignition II Conversion Kit 12 Volt Negative Ground System
Fits Allis Chalmers Tractor Models:
With Delco dist. 1111411, 1111735, 1111745: B, IB, C, CA, G, WC, WD, WD45, WF
With Delco dist. 1111745, 1112584, 1112593, 1112607, 1112609: D10, D12, D14, D15, D17, I400, I600, E, EIII, 500, 510, 512, 610, 612, 614, 615, D, H3, I40, I400, I60, I600, TL10, TL12
With Delco dist. 1111708: G
With Delco dist. 1112656: AT40, AT50
With Delco dist. 1112602 or 1112656: F30, F40, F50
With Delco dist. 1112593: G138, G160, G226
With Delco dist. 1112602 or 1112609: RT40
With Delco dist. 1112609: G149
With Delco dist. 1111411, 1111735, 1111745: W
Verify distributor number for compatibility before purchase.
Electronic Ignition II Conversion Kits work the same way as the original, but the Electronic Ignition II Conversion Kit senses current levels at the coil and adjusts the dwell to maintain peak energy throughout the entire RPM range. Dwell angle is increased or decreased with changing engine RPM and operating conditions.
Electronic Ignition II Conversion Kits have a safety feature to prevent the module from burning out if the key is left in the ON position.
Specifications
Fits Allis Chalmers Tractor Models:
With Delco dist. 1111411, 1111735, 1111745: B, IB, C, CA, G, WC, WD, WD45, WF
With Delco dist. 1111745, 1112584, 1112593, 1112607, 1112609: D10, D12, D14, D15, D17, I400, I600, E, EIII, 500, 510, 512, 610, 612, 614, 615, D, H3, I40, I400, I60, I600, TL10, TL12
With Delco dist. 1111708: G
With Delco dist. 1112656: AT40, AT50
With Delco dist. 1112602 or 1112656: F30, F40, F50
With Delco dist. 1112593: G138, G160, G226
With Delco dist. 1112602 or 1112609: RT40
With Delco dist. 1112609: G149
With Delco dist. 1111411, 1111735, 1111745: W
Verify distributor number for compatibility before purchase.
Electronic Ignition II Conversion Kits work the same way as the original, but the Electronic Ignition II Conversion Kit senses current levels at the coil and adjusts the dwell to maintain peak energy throughout the entire RPM range. Dwell angle is increased or decreased with changing engine RPM and operating conditions.
Electronic Ignition II Conversion Kits have a safety feature to prevent the module from burning out if the key is left in the ON position.
Specifications
- Fits tractors with 12 volt negative ground system only
- Must use graphite style spark plug wires. DO NOT use stainless steel or copper wires. For graphite spark plug wires, please see: JJS12751, JJS12722, or JJS12732
- Requires hot coil, please see: JJS15383
- Replaces the points and condenser with an electronic module
- Fits distributors with a clip held cap
- Clockwise rotation
- Clark 1024 w/ 1111708
- Corbitt w/ 1111725
- Gibson H w/ 1111714, 1111729
- Hough HAH & HAF both w/ 1112625 or 1111733
- Hyster XA60 w/ 1111733
- Hyster UC30 & YC40 w/ 1111534
- Hyster S30B, S40B, S50B w/ 1111716
- Ingersoll DR85 w/ 1111716
- Thew Crane #TL20 w/ 1111559
- Waukesha 180 w/ 1112618